ExxonMobil™ HDPE HTA 002HD5
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
High Density Polyethylene Resin

Product Description
HTA 002HD5 is a general purpose medium molecular weight HDPE grade, characterized by easy processability, especially in coextrusion and blending with other polyolefins. HTA 002HD5 can also be used pure, especially for easy processing and conversion into small and thin bags, to be used for light item packaging.
 
General 
Availability 1 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Antiblock: No
  • Slip: No
  • Thermal Stabilizer: Yes
Applications 
  • Blown Film
  • Collation Shrink
  • Food Packaging
  • General Packaging
  • Grocery Sacks
  • Heavy Duty Bags
  • Industrial Packaging
  • Label Film
  • Shrink Film
  • Stand Up Pouches
  • Thin Gauged Consumer Bags
  • Trash Bags
  • Trash Can Liners
Revision Date 
  • 09/15/2016
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.952
g/cm³
ASTM D1505
High Load Melt Index (190°C/21.6 kg)
16
g/10 min
ASTM D1238
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
0.68
g/10 min
ASTM D1238
 
Thermal
Typical Value
Unit
Test Based On
Vicat Softening Temperature
126
°C
ASTM D1525
 
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Yield MD
29
MPa
ASTM D882
Tensile Strength at Yield TD
29
MPa
ASTM D882
Tensile Strength at Break MD
60
MPa
ASTM D882
Tensile Strength at Break TD
50
MPa
ASTM D882
Elongation at Break MD
320
%
ASTM D882
Elongation at Break TD
450
%
ASTM D882
Secant Modulus MD - 1% Secant
960
MPa
ASTM D882
Secant Modulus TD - 1% Secant
1200
MPa
ASTM D882
Dart Drop Impact
160
g
ASTM D1709A
Elmendorf Tear Strength MD
8
g
ASTM D1922
Elmendorf Tear Strength TD
60
g
ASTM D1922
 
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
 
Processing Statement
The film properties have been measured on 15 µm (0.59 mil) thick films with a blow-up ratio of 4 : 1 and a frostline height of 9 x die diameter (die diameter/ gap: 120mm/1.0mm (4.7 in/0.06 in); 215°C (419°F) melt temperature; 70 kg/hr (154 lb/hr) output).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2022 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.