ExxonMobil™ C4LL 5036.UV
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
C4 Linear Low Density Polyethylene

Product Description
ExxonMobil™ C4LL 5036.UV is an ethylene 1-butene copolymer resin designed to offer excellent processability, whiteness, and fast grinding rate. This UV stabilized resin is ideally suited for applications that require excellent dimensional control and low warpage.
 
General 
Availability 1 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Long Term UV-8 Stabilizer: Yes
Applications 
  • Consumer Articles
  • General Purpose Articles
  • Tanks
  • Toys
 
Revision Date 
  • 03/01/2010
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.936
g/cm³
ISO 1183
Melt Index (190°C/2.16 kg)
5.0
g/10 min
ISO 1133
 
Thermal
Typical Value
Unit
Test Based On
Deflection Temperature Under Load (DTUL) at 66psi - Unannealed
52
°C
ASTM D648
Deflection Temperature Under Load (DTUL) at 264psi - Unannealed
36
°C
ASTM D648
Peak Melting Temperature
125
°C
ASTM D3418
 
Molded Properties
Typical Value
Unit
Test Based On
Tensile Strength at Yield
17
MPa
ASTM D638
Tensile Stress at Yield
17
MPa
ISO 527-2/1A/50
Tensile Strain at Yield
10
%
ISO 527-2/50
Flexural Modulus - 1% Secant
730
MPa
ASTM D790B
Flexural Modulus
700
MPa
ISO 178
Environmental Stress-Crack Resistance
   
2.00 mm, 10% Igepal, F50
30
hr
ASTM D1693
10% Igepal, F50
20
hr
ASTM D1693A
100% Igepal, F50
40
hr
ASTM D1693A
 
Additional Information
  • All physical properties were measured on 3 mm. rotomolded samples unless a different value is shown, except for ESCR, which was measured on compression molded samples.
  • Tensile testing was conducted at a crosshead speed of 50 mm/min. The tensile strength reported refers to the maximum stress reached during the test.
  • Test procedures may be modified to accommodate operating conditions or facility limitations.
 
Legal Statement
This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2025 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.