ExxonMobil™ LDPE EVA Copolymers LD 362 Series
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
Low Density Polyethylene Resin

Product Description
LD 362 series are EVA LDPE grades, offering good mechanical and sealing properties. Several additive combinations are available according to the required surface properties.
 
General 
Availability 1 
  • Africa & Middle East
  • Europe
 
Additive 
  • LD 362BR: Antiblock: 1000 ppm; Slip: 750 ppm; Thermal Stabilizer: Yes
  • LD 362BW: Antiblock: No; Slip: No; Thermal Stabilizer: Yes
  • LD 362HE: Antiblock: 1500 ppm; Slip: 550 ppm; Thermal Stabilizer: Yes
  • LD 362ON: Antiblock: 1750 ppm; Slip: No; Thermal Stabilizer: Yes
Applications 
  • Agricultural Film
  • Co-Extrusion Films
  • Foams
  • Form Fill And Seal Packaging
  • Freezer Film
  • High Clarity Film
  • Lamination Film
  • Poultry Bag
  • Rice Bags
  • Rubber Bale Wrap
Revision Date 
  • 01/01/2017
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.928
g/cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
2.0
g/10 min
ASTM D1238
Vinyl Acetate Content
4.5
wt%
ExxonMobil Method
Peak Melting Temperature
104
°C
ExxonMobil Method
 
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Break MD
33
MPa
ASTM D882
Tensile Strength at Break TD
19
MPa
ASTM D882
Elongation at Break MD
220
%
ASTM D882
Elongation at Break TD
550
%
ASTM D882
Secant Modulus MD - 1% Secant
170
MPa
ASTM D882
Secant Modulus TD - 1% Secant
200
MPa
ASTM D882
Dart Drop Impact
150
g
ASTM D1709A
Elmendorf Tear Strength MD
170
g
ASTM D1922
Elmendorf Tear Strength TD
60
g
ASTM D1922
 
Optical Properties
Typical Value
Unit
Test Based On
Haze
6.9
%
ASTM D1003
 
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
 
Processing Statement
The test specimen were prepared on LD 362BW, 30µm (1.97mil) thick film, using a 200 mm (7.9 in) die, die gap of 1.0 mm (39.4 mil), Blow-Up Ratio 2.5 and temperature profile of 170 - 180°C (338- 356°F).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.