ExxonMobil™ LDPE EVA Copolymers LD 361 Series
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
Low Density Polyethylene Resin

Product Description
LD 361 series are LEVA LDPE grades, offering good mechanical and sealing properties. Several additive combinations are available according to the required surface properties.
 
General 
Availability 1 
  • Africa & Middle East
  • Europe
 
Additive 
  • LD 361HF: Antiblock: 1500 ppm; Slip: 833 ppm; Thermal Stabilizer: Yes
  • LD 361JD: Antiblock: 1800 ppm; Slip: 330 ppm; Thermal Stabilizer: Yes
  • LD 361BW: Antiblock: No; Slip: No; Thermal Stabilizer: Yes
Applications 
  • Agricultural Film
  • Co-Extrusion Films
  • Foams
  • Form Fill And Seal Packaging
  • Freezer Film
  • Lamination Film
  • Poultry Bag
  • Rice Bags
Revision Date 
  • 01/01/2017
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.926
g/cm³
ASTM D1505
Melt Index 2 (190°C/2.16 kg)
0.50
g/10 min
ASTM D1238
Vinyl Acetate Content
4.2
wt%
ExxonMobil Method
Peak Melting Temperature
218
°F
ExxonMobil Method
 
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Break MD
3800
psi
ASTM D882
Tensile Strength at Break TD
2900
psi
ASTM D882
Elongation at Break MD
250
%
ASTM D882
Elongation at Break TD
460
%
ASTM D882
Secant Modulus MD - 1% Secant
23000
psi
ASTM D882
Secant Modulus TD - 1% Secant
27000
psi
ASTM D882
Dart Drop Impact
360
g
ASTM D1709A
Elmendorf Tear Strength MD
150
g
ASTM D1922
Elmendorf Tear Strength TD
110
g
ASTM D1922
 
Optical Properties
Typical Value
Unit
Test Based On
Gloss (45°)
41
 
ASTM D2457
Haze
14
%
ASTM D1003
 
Legal Statement
This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
 
Processing Statement
The test specimen were prepared on LD 361BW, 50µm (1.97mil) thick film, using a 200 mm (7.9 in) die, die gap of 1.0 mm (39.4 mil), Blow-Up Ratio 2.5 and temperature profile of 180 - 190°C (356- 374°F).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
2Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other standard conditions, based on ASTM D 1238.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2019 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.