ExxonMobil™ HDPE
HTA 108
Units
SI
English
High Density Polyethylene Resin
Product Description
HTA 108 is a homopolymer HDPE film grade designed to improve stiffness and barrier in coextrusion or in PE blends. When blended with LLDPE or metallocene LLDPE, HTA 108 improves their processability.
General
Availability
1
Africa & Middle East
Asia Pacific
Europe
Additive
Antiblock: No
Slip: No
Thermal Stabilizer: Yes
Applications
Blown Film
Bread Bags
Collation Shrink
Food Packaging
Form Fill And Seal Packaging
Freezer Film
General Packaging
Industrial Packaging
Label Film
Lamination Film
Multilayer Packaging Film
Overwrap Film
Packaging Films
Shoppers
Shrink Film
Stand Up Pouches
Revision Date
03/01/2014
Resin Properties
Typical Value
Unit
Test Based On
Density
0.961
g/cm³
ASTM D1505
Melt Index
(190°C/2.16 kg)
0.70
g/10 min
ASTM D1238
High Load Melt Index
(190°C/21.6 kg)
46
g/10 min
ASTM D1238
Thermal
Typical Value
Unit
Test Based On
Vicat Softening Temperature
127
°C
ASTM D1525
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Break MD
60
MPa
ASTM D882
Tensile Strength at Break TD
(500 mm/min)
31
MPa
ASTM D882
Elongation at Break MD
(500 mm/min)
510
%
ASTM D882
Elongation at Break TD
(500 mm/min)
2
%
ASTM D882
Secant Modulus MD - 1% Secant
1200
MPa
ASTM D882
Secant Modulus TD - 1% Secant
1700
MPa
ASTM D882
Dart Drop Impact
< 30
g
ASTM D1709A
Elmendorf Tear Strength MD
10
g
ASTM D1922
Elmendorf Tear Strength TD
200
g
ASTM D1922
Additional Information
Monolayer Film:
HTA108 can be added to LDPE, LLDPE or mLLDPE films to increase stiffness when high transparency is not mandatory.
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement
The test specimens for Vicat Softening Point were prepared using ASTM D 4703. All film properties have been measured on 25 µm (0.98 mil) thick films (BUR of 2.5 : 1, pocket extrusion at 200°C / 392°F). Properties of coextruded films and blends can be found in the HTA108 Fact Sheet.
Notes
1
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
For additional technical, sales and order assistance:
www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium
exxonmobilchemical.com
Typical properties: these are not to be construed as specifications.
©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.