ExxonMobil™ EVA 20020FL
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
Ethylene Vinyl Acetate Copolymer

Product Description
ExxonMobil™ EVA 20020FL is primarily designed for high speed/low coating weight extrusion coating and is a good coextrusion partner with other polymers. ExxonMobil™ EVA 20020FL is an excellent sealing material with a very low seal initiation temperature, high clarity, and low gel. Excellent results areobtained in extrusion coating at 220°C (428°F) temperature range. Processing temperatures above 240°C (464°F) may cause resin degradation.ExxonMobil™ EVA 20020FL should be fed into the extruder after LDPE of a similar or higher melt index. Machines should always be purged with LDPE or a suitable cleaning compound before shutdown.
 
General 
Availability 1 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Antiblock: No
  • Slip: No
  • Thermal Stabilizer: Yes
Applications 
  • Adhesive Lamination
  • Adhesive Layer onto OPP
  • Barrier Food Packaging
  • Cling Layer
  • Coextrusion Coating
  • Compounding
  • Document Plastification
  • Extrusion Coating
  • Extrusion Lamination
  • Flexible Packaging
  • High Frequency Sealing
  • Industrial Packaging
  • Injection Molding
  • Masterbatch Base Resin
  • Non-Woven Coating
  • PVC Replacement
  • Surface Protection Film
  • Thermal Lamination
  • Wire and Cable Compounds
Revision Date 
  • 01/01/2018
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.940
g/cm³
ASTM D1505
Melt Index 2 (190°C/2.16 kg)
20
g/10 min
ASTM D1238
Vinyl Acetate Content
20.0
wt%
ExxonMobil Method
Peak Melting Temperature
177
°F
ExxonMobil Method
 
Thermal
Typical Value
Unit
Test Based On
Vicat Softening Temperature
118
°F
ASTM D1525
 
Molded Properties
Typical Value
Unit
Test Based On
Tensile Modulus (0.20 in/min)
4500
psi
ASTM D638
Tensile Strength at Break (20 in/min)
1200
psi
ASTM D638
Elongation at Break (20 in/min)
830
%
ASTM D638
Durometer Hardness
  ASTM D2240
Shore A, 15 sec
87
 
 
Shore D, 15 sec
29
 
 
 
Legal Statement
This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
 
Processing Statement
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D4703 Procedure C (Tensile ASTM D638 : Type IV dumbbell, Hardness ASTM D2240 : 3 plied up disks) and 4 mm (157 mil) for VICAT.
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
2Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other standard conditions, based on ASTM D1238.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2025 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.